Framing Drywall Ceiling

February 17, 2024 Post a Comment

Framing drywall ceiling

If you're hanging drywall on new ceiling joists, you probably won't need furring strips. Standard drywall panels attach directly to the joists with drywall screws. If the ceiling is old, however, and you don't want to remove the existing ceiling finish, furring strips can provide a solid base.

Can you attach drywall to ceiling joists?

Yes you can, but it is not always easy to do. The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall.

Should there be a gap between drywall and ceiling?

Cut it to leave about a 1/8-in. gap at edges (right). In fact, when you're hanging the ceiling, keep in mind that 1/2 in. along the perimeter will be covered by drywall on the walls.

Can 1/2 drywall be used on ceilings?

1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.

Should you nail or screw furring strips?

If you HAVE to run furring strips rather than building a wall, definitely go with mechanical fasteners (i.e tapcon screws -- avoid concrete nails). Construction adhesive is not made for a "structural application" such as bonding 2x4's to a concrete wall.

Do you nail or screw furring strips?

For furring strip installation, affix the strips across the joists every 24” on center with screws or nails at least 1” long so that they will go into the joist with a minimum depth of 1/4". Use shims, if necessary, to achieve a uniform flat and level ceiling or wall.

Should I use screws or nails for drywall?

Drywall screws provide a stronger hold, but cost a bit more than nails. When choosing drywall screws vs. nails, consider the size of your project and the materials you'll be using. Use screws instead of nails when you are working on a ceiling installation or working with metal studs or frames.

Which way do you run drywall on ceiling joists?

Hanging drywall perpendicular to the overhead framing members is a good idea for several reasons:

Less-visible seams. A perpendicular orientation allows each sheet of drywall to float over the framing members, making uneven joists or trusses blend in.
Structural strength.

How far can ceiling drywall span?

For 1/2” drywall installed on the ceiling the same direction as the joists, without adhesive, the max span is 16”. If its installed Perpendicular to the joists, the max span is 24”.

What are two common mistakes made during Drywalling?

5 common drywall installation mistakes and how to avoid them

Driving screws too deep.
Joints are too tight. ...
Fastening before trimming. ...
Placing joints next to doors and windows. ...
Having too many joints. ...
Kick off your next project at Al's.

Can drywall be too tight?

Making Joints too Tight Two adjacent sheets that are joined too tightly together can cause the drywall to crack during installation or over time. It is crucial to allow enough space for seasonal expansion and contraction of the wooden framing materials.

Do you use corner bead on ceiling?

Drywall corner beads are often used between the ceiling and the walls as well as in corners. The drywall corner bead is used to create a smooth, seamless surface along drywall corners and intersections. It also reinforces the drywall and helps prevent dents, scrapes and other signs of damage.

Do ceilings have to be 5/8 drywall?

What size of drywall do you use for ceilings? 1/2″ for normal rooms with 16″ or less on center ceiling joists. In rooms with joists spaced over 16″, and in garages where the ceiling separates the garage from a living space above, use 5/8″ fire rated drywall.

How far can 5/8 drywall span on a ceiling?

Strong back in the middle and a wire every four feet to structure we talked about that on the last

Can 3/8 drywall be used on ceilings?

Depending on the joists spacing, whatever you save by installing 3/8" you will likely loose because the thinner the drywall the harder it is to install it, especially on the ceiling. 1/2" will be just fine even with 24" joists spacing but in many jurisdictions garage ceilings require 5/8" due to fire regulations.

How far apart should furring strips be for drywall?

Most builders keep furring strips 16-inch apart for siding, 16 or 24-inch apart for a metal roof, and about 8 to 10 inches apart for drywall.

How do you attach furring strips to the ceiling?

Now the next step is to take your fern strip. Place it up against your studs. We're going to go

Why are they called furring strips?

The origin of the furring strip may be from the root "furr", which is the term given to the space behind the field of lath. Metal furring strips are used for commercial projects, or in towns where fire-proof supporting elements are required by the local building code.

Can you use drywall screws for furring strips?

Once the furring strips are in place, you can install the drywall the same way you would on any stud wall. For a standard 8-foot high wall, start by installing a sheet of drywall horizontally at the top edge of the wall, using drywall screws inserted every 8 inches into the furring strips.

What nails do you use for furring strips?

This site recommends using a Yellow #4 load on strips 3/4" thick, or Green #3 for 1/4" - 1/2". You could also use concrete screws. Pre-drill holes in furring strip and wall (about every 24").